So where do I go ...

So where do I go ... (Full Version)

All Forums >> [Chrysler / Mopar] >> Jeep / 4x4

Message

Very_Dirty_Harry -> So where do I go ... (Jul. 13 2007 3:15:08)
... for reliable Jeep servicing in South Yorkshire? (1995 Grand Cherokee) I tried a bloke in Anston who claims to be the foremost expert [8\|] on the marque in the area (I misremember the name - Autotechnics or some such). Totally incompetent! Take the car in for 4 or 5 hours work and he has it for 3 days [:'(] A job that should only require an overnight 'stay' meant he had it for 5 whole days [:@] B&H Autos of Doncaster? Asked them to retrack the front suspension as the steering wheel needed to be kept 20 degrees left of centre only for them to return it with the wheel 15 degrees right of centre. If they can't get such a simple job right how can I trust them with more important stuff - brakes, suspension, engine longevity, etc? Much as I'd like to do it all myself I have neither the physical strength or stamina that I used to have nor any of the necessary computer controlled diagnostic tools now necessary. At least I can do much more on the Rolls as it's built around 60's technology, most of which I can fix with my eyes closed ( literally in the case of carb balancing [:D])

Colin -> RE: So where do I go ... (Jul. 13 2007 19:08:59)
Sell the jeep and buy another roller [:D]

Dek -> RE: So where do I go ... (Jul. 13 2007 21:27:39)
stop moaning at least you got to drive that roller 24/7 for a while [:D] [:D] [:D] [:D]

Very_Dirty_Harry -> RE: So where do I go ... (Jul. 15 2007 14:06:13)
You're all so .. helpfull [8\|] I feel like getting another Moggy Thou ... [:-]

Very_Dirty_Harry -> RE: So where do I go ... (Jul. 22 2007 17:23:21)
Can I take it then that you either don't know of a good, reliable and (preferably) inexpensive servicing garage in my area? Or are you just keeping it a secret? [:-] Is the Jaguar guy on Barbot Hall Industrial Estate any good? I've had a tip from the fellah wot put the LPG system in the Jeep that he's good in that area of expertise, although he hasn't bothered to register as such.

daveredneck -> RE: So where do I go ... (Jul. 23 2007 1:53:54)
quote: ORIGINAL: Very_Dirty_Harry Can I take it then that you either don't know of a good, reliable and (preferably) inexpensive servicing garage in my area? Or are you just keeping it a secret? [:-] sent you an email [;)]

Very_Dirty_Harry -> RE: So where do I go ... (Jul. 23 2007 13:09:07)
Ta very glad, old chum.

smithy -> RE: So where do I go ... (Jul. 24 2007 10:46:36)
quote: ORIGINAL: Colin Sell the jeep and buy another roller [:D] I also thought of this.

daveredneck -> RE: So where do I go ... (Jul. 26 2007 1:48:45)
quote: ORIGINAL: Colin Sell the jeep and buy another roller [:D] Col dint you once have a roller?

Colin -> RE: So where do I go ... (Jul. 26 2007 13:25:56)
quote: ORIGINAL: daveredneck quote: ORIGINAL: Colin Sell the jeep and buy another roller [:D] Col dint you once have a roller? Yes a '68 always wanted one and when I got it, it was a big disapointment [:@] used it for carrying my tools around [:D] and welder in the boot

Very_Dirty_Harry -> RE: So where do I go ... (Jul. 26 2007 20:05:28)
quote: Colin Yes a '68 always wanted one and when I got it, it was a big disapointment [:@] used it for carrying my tools around [:D] and welder in the boot Philistine! Hanging's to good for the like of you [X(]

Colin -> RE: So where do I go ... (Jul. 29 2007 23:13:03)
quote: ORIGINAL: Very_Dirty_Harry quote: Colin Yes a '68 always wanted one and when I got it, it was a big disapointment [:@] used it for carrying my tools around [:D] and welder in the boot Philistine! Hanging's to good for the like of you [X(] There as common as dog $hit and just as useful [8D]

Page: [1]

Forum Software © ASPPlayground.NET Advanced Edition

0.094